High Quality Prismatic Lithium Batteries

  • Home
  • /
  • Shop
  • /
  • Victron SmartSolar MPPT Controller 100/20 12V, 24V, 48V

Victron SmartSolar MPPT Controller 100/20 12V, 24V, 48V

$259.00

AVAILABILITY: AU stock – ships in 24 hours

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Bluetooth Smart built-in

The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers.

 

VE.Direct

For a wired data connection to a Color Control GX, other GX products, PC or other devices

 

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

 

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage (48V model: interface with a relay). Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life. The load output is short circuit proof.

 

Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards, the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

  

Programmable battery charge algorithm

See the software section on https://www.victronenergy.com.au/  for details

 

Day/night timing and light dimming option

See the software section on https://www.victronenergy.com.au/  for details

 

Internal temperature sensor

Compensates absorption and float charge voltage for temperature.

 

Optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

 

Specification: click here

Warranty: 5 Years by Victron Energy

Reviews

There are no reviews yet.

Be the first to review “Victron SmartSolar MPPT Controller 100/20 12V, 24V, 48V”

Your email address will not be published.

FREE SHIPPING

Australia Wide

30 DAYS MONEY-BACK GUARANTEE

5 YEARS WARRANTY

>